Product Name: North America FWX-500A 250V500A
Product parameters and model:
voltage250V model35-2500A
current：
FWX-35A FWX-100A FWX-300A FWX-1000AH
FWX-40A FWX-125A FWX-350A FWX-1200AH
FWX-45A FWX-150A FWX-400A FWX-1500AH
FWX-50A FWX-175A FWX-450A FWX-1600AH
FWX-60A FWX-200A FWX-500A FWX-2000AH
FWX-70A FWX-225A FWX-600A FWX-2500AH
FWX-80A FWX-250A FWX-700A
FWX-90A FWX-275A FWX-800A
The 35-800A product has been UL-approved.
The breaking capacity is 200KA RMS symmetrical.
The power loss is the value of power loss at rated current.
250V DC / breaking capacity 20KA.
Basic introduction:
BUSSMANN provides a full range of North American knife-type flat-end fuses and accessories. The product design and construction have been optimized, featuring the following characteristics:
1. Small power integral flux (I2t)
2. Low power consumption
3. High recyclability
4. Small arc voltage
5. Excellent DC performance
For some North American series products, both external and internal open-type fuse indicators are available. For most applications, fuse holders can be provided.
BUSSMANN North American series fuse holders 1BS101, 1BS102, 1BS103, 1BS104.
Connector-type fuse holder, suitable for wire termination and featuring heat dissipation.
The maximum voltage of 1BS101 is 600V, and its maximum rated current is 100A.
1BS102 has a maximum voltage of 600V and a current of 400A;
The maximum voltage of 1BS103 is 600V, and the current is 400A;
The maximum voltage of 1BS104 is 600V, and the current is 600A.
BUSSMANN offers a wide range of TRON brand fixed rectifier fuse holders.
The connection of cables and fuses is the same as that of bolt-type fuse holders, and can be installed using stud bolts.
